Product Description
- Fabricated Lift Blocks w/ U-Bolts
- Front Adjustable Performance Lift Struts 7-9"
- Rear Shocks
- Front and Rear Crossmember
- CV Axle Spacers
- Front Lift Spindles
- Compression Struts
- Compression Strut Brackets
- Lower A Arm Support Rods
- Front Brake Line Brackets
- Wheel Spacers
- Re-Enforcement Plates
- Skid Plate
- Sway Bar Drops
- Sway Bar Extenders
- Differential Drops
- Tie Rods
- Complete Hardware Package
Notes:
If you are installing the provided rear lift shims, then you will need purchase and install the rear drive-line spacer #50005
If running this kit at the 9″ position, we highly recommend using Upper Control Arms #50706 (sold separately) to help with bump stop clearance issues
Over-sized tires and heavier wheels can cause premature wear on factory and aftermarket components like ball joints, bushings, tie-rod ends, wheel bearings, idlers arms, drive-lines, etc… You may need to replace / install new components sooner than factory recommendations based on the wheels and tires you choose. Please note that the heavier and wider wheels and tires combined with aggressive driving (off-road and on highways) will cause more wear on ALL moving parts, factory and aftermarket. Especially when vehicle is in 4wd or Auto-4wd / AWD modes.
Spindles and u-bolts are shipped with protective coating on surface. This allows them to be delivered to you without rust. We recommend you clean and paint the parts before you install, to protect against any future rust. Remember, spindles and u-bolts are bare metal. And will rust without paint.
